If you are using a shared PC make sure you log out at the end of your session. This protects your account privacy and especially important if you use a PC in a public library or an internet cafe.

Author Topic: Jelly mould? needs an ID - ID = Wileman & Co  (Read 4388 times)

Offline a40ty

  • Board Regular
  • *
  • Posts: 81
  • Gender: Female
Jelly mould? needs an ID - ID = Wileman & Co
« on: November 26, 2007, 10:37:06 AM »
Good morning everyone, hope you can help.
I inherited this from my grandmother and am curious to know of it's origins.It is 14 cms tall, 16 cms wide and 13? cms deep. It isn't very pretty but I reckon it would make quite cathedrally jellies  :)
It isn't possible to decifer the words above the stamp, other than the first word is "THE"

Hope to hear from you!
If it ain't broke, don't fix it!

Offline Tigerchips

  • Board Moderator
  • Board Super-hero
  • ****
  • Posts: 1558
  • Gender: Male
Re: Jelly mould? needs an ID
« Reply #1 on: November 26, 2007, 10:41:48 AM »
It might be Wileman & Co (Shelley) as they made jelly moulds.

Offline Tigerchips

  • Board Moderator
  • Board Super-hero
  • ****
  • Posts: 1558
  • Gender: Male
Re: Jelly mould? needs an ID
« Reply #2 on: November 26, 2007, 10:44:56 AM »

Offline a40ty

  • Board Regular
  • *
  • Posts: 81
  • Gender: Female
Re: Jelly mould? needs an ID
« Reply #3 on: November 26, 2007, 11:11:21 AM »
 :clap:  :clap:

Thank you Tigerchips! It is indeed a Wileman & Co, although their jelly moulds were much prettier on the outside. Perhaps my grandmother bought a second or a fake  :o certainly looks like it..
If it ain't broke, don't fix it!

Offline Tigerchips

  • Board Moderator
  • Board Super-hero
  • ****
  • Posts: 1558
  • Gender: Male
Re: Jelly mould? needs an ID
« Reply #4 on: November 28, 2007, 10:02:02 PM »
I have no knowledge of the way things are moulded but it's as if it's been pressed into a mould by hand from the outside, I'll have a look in some of my books to see if I can find anything similar.


Offline Tigerchips

  • Board Moderator
  • Board Super-hero
  • ****
  • Posts: 1558
  • Gender: Male
Re: Jelly mould? needs an ID
« Reply #5 on: November 28, 2007, 11:00:54 PM »
I think this would be called a 'Carlton' design. I have found plenty of Shelley Jelly moulds but none are mentioned to have the mark of Wileman & Co.  I have also seen a few similar to yours with the mould only on the inside, those ones date to the 19th century but I found no Shelley ones like this.

http://cgi.ebay.nl/ws/eBayISAPI.dll?ViewItem&item=170152979593

Millers says that the deep indentation on the top surface is an area for the cream to be poured over the top.

Offline Tigerchips

  • Board Moderator
  • Board Super-hero
  • ****
  • Posts: 1558
  • Gender: Male
Re: Jelly mould? needs an ID
« Reply #6 on: November 28, 2007, 11:20:55 PM »
The mark is for 1890 - 1910 according to this site.
http://www.shelley.co.uk/backstamps.html

The registration number dates the design to > 1904

Offline a40ty

  • Board Regular
  • *
  • Posts: 81
  • Gender: Female
Re: Jelly mould? needs an ID
« Reply #7 on: November 29, 2007, 06:02:25 AM »
The mark is for 1890 - 1910 according to this site.
http://www.shelley.co.uk/backstamps.html

The registration number dates the design to > 1904


I had found the first link but the second, with the date... :sun: Thank you for going to so much trouble. It's really nice to know the age of something.
I think this would be called a 'Carlton' design. I have found plenty of Shelley Jelly moulds but none are mentioned to have the mark of Wileman & Co.  I have also seen a few similar to yours with the mould only on the inside, those ones date to the 19th century but I found no Shelley ones like this.

http://cgi.ebay.nl/ws/eBayISAPI.dll?ViewItem&item=170152979593

Millers says that the deep indentation on the top surface is an area for the cream to be poured over the top.
I'm curious, or , more likely thick  ::)  And have never, ever  made a jelly. ;D What do you think Millers mean by that?  Don't you just turn said jelly out of the mould and slosh the cream over it ?

If you ever find out anything about the outer surface, I'd really appreciate it.
If it ain't broke, don't fix it!

Offline Lustrousstone

  • Board Addict
  • ***
  • Posts: 567
  • Gender: Female
    • My ebay stuff
Re: Jelly mould? needs an ID
« Reply #8 on: November 29, 2007, 12:45:50 PM »
More likely to give you somewhere to put a nice thick wodge of whipped cream and a few decorative bits and pieces without it all sliding down the sides
Christine
Which Tyler led the pedants revolt?

Offline a40ty

  • Board Regular
  • *
  • Posts: 81
  • Gender: Female
Re: Jelly mould? needs an ID
« Reply #9 on: November 29, 2007, 05:44:35 PM »
Aha! Hadn't thought of that.. this one has only room for a serious dieter's ration of cream  :'( and perhaps a single raspberry..  :fstv:
If it ain't broke, don't fix it!

Offline Sue C

  • Board Addict
  • ***
  • Posts: 584
  • Gender: Female
Re: Jelly mould? needs an ID
« Reply #10 on: November 29, 2007, 10:38:27 PM »
I am begining to wonder if this was meant for meat's covered in aspic/ such as pressed ham? it may accoun t for the thick outer.
"you'll Never Walk Alone"
Liverpool anthem.

 

SMF spam blocked by CleanTalk